World Television Day is coming up this Saturday, celebrating the technology that has beamed events both big and small into households around the world.
These days, the image that comes to mind when the average person thinks of a TV is a far cry from the bulky sets of the past.
A Department of Statistics Malaysia (DOSM) report from 2022 says that 99% of households in the country have access to a television, underlining just how mainstream the technology has become.
With that in mind, it’s worth taking a trip down memory lane to revisit how TVs have evolved over the years.
Turning back the clock
It’s been an entire century since the world’s first television demonstration took place in London, on Jan 26, 1926.
According to reports, it was showcased by John Logie Baird to members of the Royal Institution, a scientific research and education organisation, along with the press.
Based on the Scotland-based Museum of Communication Foundation Trust’s website, this mechanical TV, which Baird called a Televisor, worked by using a spinning “Nipkow disk” to scan an image.
This disk had a series of equally spaced holes arranged in a spiral pattern, which passed over a square cutout through which the image was viewed. As the disk spins, each hole allows light to reach a selenium cell, which detects the changes in light intensity.
These signals were then transmitted to a receiving Televisor, where a second Nipkow disk and a light source reproduced the image line by line.
At the time, an image would be split into 30 lines, making for a blurry final output. By 1934, this went up to 240 lines, allowing for better picture quality. In the 1930s, around a thousand of these early TVs were manufactured and sold.
However, they were soon met with competition with the advent of electronic televisions, with American inventor Philo Farnsworth demonstrating such a system for the first time in San Francisco in 1927, according to Encyclopaedia Britannica.
These electronic televisions solved a significant limitation the mechanical ones faced, that being a limited number of scans per second.
Since mechanical televisions used rapidly spinning disks with a fixed number of holes, their scanning speed was capped by how quickly the disks could rotate. This limited the number of images that could be reproduced each second, resulting in lower picture clarity and flickering.
In contrast, cathode-ray tube (CRT)-based electronic televisions used electron beams to scan and reproduce images with phosphorescent materials inside vacuum tubes. By 1936, it had supplanted mechanical TVs and become the de facto option for BBC broadcasts in the United Kingdom.
As broadcasting grew, different technical standards were adopted across regions. By the 1950s, the United States had used a 525-line system displaying 30 pictures per second, while European systems generally used 625 lines at 25 pictures per second.
Around the same time, colour TV became publicly available. This culminated in two systems to display colour, that being the National Television Systems Committee (NTSC) and Phase Alternation Line (PAL) systems.
A key characteristic of this technology was its backward compatibility, allowing existing black-and-white televisions to continue receiving broadcasts without requiring viewers to replace their sets.
The PAL standard – the video format standard used in Malaysia – was largely similar to NTSC, though it maintained the European number of lines and pictures shown per second, and used a different colour encoding system designed to reduce colour distortion and improve colour accuracy.
A Bernama infographic from 2019 outlines that the first TV station broadcast in Malaysia was in 1963, with a second station launching in 1969, becoming known as RTM1 and RTM2, respectively. Colour TV broadcasting began in 1978.
Slimmer, lighter TVs
One key issue was that as CRT screens became larger, the vacuum tubes also had to become deeper and much heavier, and eventually faced competition from flat-panel technologies such as liquid-crystal display (LCD) technology, which made it possible to produce larger TVs that were far thinner and lighter. This led to CRTs being eventually phased out by the 2010s.
However flat panel TVs were expensive at first, so this shift was not initially driven by price.
Based on a conference article published by the Institute of Electrical and Electronics Engineers (IEEE) IN 2012, the advent of LCD technology was in 1964 at RCA Laboratories in Princeton, New Jersey.
The “liquid-crystal” in the name refers to a material that changes its molecular orientation when voltage is applied to it, known as nematic liquid crystals.
The liquid crystals are sandwiched between two sheets of polarising material, which control how much light passes through the display by altering the alignment of the crystals. This is what creates a picture on the screen by lightening or darkening areas to result in a recognisable image.
Colour is introduced through red, green and blue subpixels, which filter the light passing through the liquid crystals to produce different colours.
The intensity of each subpixel is controlled by the voltage applied to it, which determines how much light passes through. By varying the intensity of the red, green and blue subpixels, the display can produce different shades of each colour or combine them to create secondary colours.
In 1988, Sharp developed a 14in colour TFT LCD prototype, described as the world’s first at that size.
Something to note is that the LCDs do not produce light by themselves, but rather require a backlight to create a picture.
This backlight can change how colour is reproduced and the overall brightness of the final output. Early LCD TVs and monitors generally used cold cathode fluorescent lamps (CCFLs) – thin fluorescent tubes positioned either directly behind the LCD panel or along the edges to provide a uniform white light as their primary backlighting technology.
As technology advanced in the late 2000s, CCFLs were largely phased out and replaced by light-emitting diode (LED) backlights, which offered lower power consumption, longer lifespans, mercury-free construction, and much thinner television designs.LEDs were also used to alter or improve colour accuracy, brightness and contrast.
In 1997, plasma TVs hit the consumer market, according to a 2024 report from British magazine and online publication What Hi-Fi?. The same report further says that production of plasma TVs largely lost in popularity to LCD.
This technology utilised plasma (ionised gases) stored in tiny cells that emit ultraviolet (UV) light when voltage passes through them. The light then goes through a phosphor coating to create red, green, or blue colours. These colours are then combined to create a picture on a display.
The next development in TV tech was organic light-emitting diode (OLED), which became available alongside plasma TVs. According to online publication HowStuffWorks.com, unlike LCDs, OLED displays do not require a backlight, as each pixel produces its own light when an electrical current passes through it.
Manufacturers can then use organic films to change the light’s colour to red, green, and blue, which can then combine to create a picture. This also allows individual pixels to be switched off completely, producing deeper blacks and greater contrast.
In comparison, LCD TVs that use an LED backlight will not be able achieve the same black level, resulting in what is called “bloom”. Bloom is when a lighter area produced by a backlight leaks to a darker area. This pushed manufacturers to develop local dimming technology, allowing for some certain parts of a screen to dim independently for one another to prevent blooming and improve contrast.
Different colours are produced using organic compounds that emit red, green or blue light, which are combined to create the full range of colours displayed on the screen.
Today, OLED technology is commonly found in both televisions and smartphones.
