New 787 issue to slow delivery of Boeing jets


Corrective measures: Workers assemble 787s inside Boeing’s campus in South Carolina. The problem involves a fitting for the horizontal stabiliser located at the base of an aircraft’s tail, which allows a plane to maintain longitudinal balance while flying. — Reuters

WASHINGTON: Boeing says it could be forced to slow deliveries of its 787 Dreamliner after the company discovered a new production flaw that will require it to inspect all 90 jets in its inventory, the latest in a series of setbacks for the widebody plane.

While the newly-found production hiccup does not pose a flight safety concern, it follows a month-long 787 delivery stoppage that was resolved in March and adds yet another delay for Boeing as the US planemaker struggles to rework the planes before they can be delivered to customers.

The problem involves a fitting for the 787’s horizontal stabiliser installed by a Boeing production facility in Salt Lake City, Utah, the company said.

The horizontal stabiliser, located at the base of an aircraft’s tail, allows a plane to maintain longitudinal balance while flying.

Boeing will need to inspect all 90 Dreamliners in its inventory before they can be delivered and expects it will take two weeks to fix each aircraft, the company added.

The manufacturer said it found last week that the fitting included shimming, a material that fills gaps between the surfaces of an aircraft, that was improperly sized and did not meet specifications.

Last Friday, it stopped approving 787s suspected to have the flaw for delivery, the company said.

The issue does not immediately affect in-service 787s, Boeing said, but the company could not say how far back the issue stretches or whether Dreamliners currently operated by airlines will need a fix.

Boeing, which announced last week that it had increased 787 production from three to four jets a month, said the issue has not caused a halt in 787 production.

“There should be minimal production disruption given that conforming shims require only minor changes,” Jefferies analyst Sheila Kahyaoglu said in a note to clients.

Boeing shares, which fell 2.4% immediately after the defect was announced, closed 0.7% lower on Tuesday.

The US Federal Aviation Administration (FAA) said in a statement that it had validated Boeing’s assessment that there was no immediate safety issue for 787s already in service.

The agency, however, said it would not issue any new airworthiness certificates for the 787 until the matter was addressed to its satisfaction.

The FAA typically delegated such authority to the manufacturer. But in some instances, like the 737 MAX and 787, it has retained responsibility for approving each new airplane.

Boeing said it has notified customers that rework would affect the timing of near-term 787 deliveries but added that it believed it could still deliver 70 to 80 Dreamliners this year.

The 787’s latest problem mirrors production issues discovered in 2020 and 2021 that included improperly fitted shimming that led to paper-thin gaps between surfaces on the Dreamliner’s fuselage.

Boeing stopped 787 deliveries at multiple points during that period, resuming them last August after agreeing to an FAA-approved modification plan for Dreamliners in the company’s inventory.

The company faced yet another 787 delivery stoppage in February after Boeing found a data analysis error regarding the forward pressure bulkhead that was unrelated to the shimming problem.

In March, the FAA said it would allow Boeing to restart 787 deliveries as the US planemaker had addressed concerns.

The latest 787 production defect comes as Boeing grapples with a 737 bracket installation issue disclosed in April, which slowed deliveries of the cash-generating family of narrow-body jets, including the bestselling MAX 8 model.

Boeing chief executive officer Dave Calhoun in April called the problem a “gnarly defect” that was nearly impossible for workers to visibly assess.

The company said last month that it had begun delivering reworked 737s. — Reuters

Follow us on our official WhatsApp channel for breaking news alerts and key updates!
   

Next In Business News

SC adds 2 unauthorised entities, 4 potential clone entities to investor alert list
Asean Digital Economy Framework expected to conclude at Asean Summit 2025
Malaysia's nominal GDP for 2023 amounts to RM1.8 trillion
More inclusive approach needed
Tech slump knocks Asia shares, yen towers at 2-1/2-month peak
Nestle lowers full-year guidance on quicker-than-expected price fall
Luxchem records earnings jump to RM12.2mil in 2Q
Oil falls on weak China demand concerns, Mideast ceasefire talks
Malaysia's LI rises 3.8% in May 2024, economy remains resilient - DoSM
Ahmad Zaki Resources bags RM152mil contract for PD specialist hospital

Others Also Read